ROX 01 Charging Guide in UAE

ROX 01 looks like an adventure SUV, but from a charging perspective it behaves more like a large electric vehicle than a typical small plug-in hybrid. Its official 56.01kWh traction battery is large enough to cover substantial daily driving on electricity, which makes a proper home charger far more useful than occasional socket charging.

For UAE owners, the strongest official charging figure is clear: ROX lists 7kW AC charging and approximately 8.6 hours from 0% to 100%. That makes the vehicle well suited to overnight charging at a villa, private parking space or workplace.

A Large PHEV Battery Changes the Charging Strategy

Many plug-in hybrids have small batteries that can be refilled slowly. ROX 01 is different. Its 56.01kWh battery is large enough that charging from an ordinary low-power source may become inconvenient for daily use.

With a dedicated 7kW wallbox, the vehicle can complete a full charge overnight according to the official 8.6-hour figure. In normal daily driving, owners will often recharge only the energy used that day, so the actual overnight session may be much shorter.

Official ROX 01 Charging Data

Choose the Charger by Port, Not by Model Name

ROX 01 vehicles in the UAE are not all identical. GCC versions may use Type 2 AC and CCS2 DC, while many China-imported vehicles use GBT AC and GBT DC. Check the actual port before choosing a charger or adapter.

For daily home use, a 7kW wallbox is the main recommendation. Choose Type 2 or GBT according to the vehicle.

A 7kW installation is especially practical for owners who return home in the evening and leave again in the morning. Even after a long electric drive, the official full-charge window fits within a typical overnight period.

Can ROX 01 Use an 11kW or 22kW Wallbox?

A higher-rated Type 2 wallbox may be physically compatible, but the vehicle will only draw the AC power allowed by its onboard charger. Installing a 22kW charger does not force ROX 01 to charge at 22kW.

A higher-capacity wallbox may still make sense when the customer wants one charger for multiple EVs or plans to change vehicles later. For ROX 01 alone, the official 7kW figure remains the most relevant planning number.

Charging at a UAE Villa

For a villa installation, the installer should check the route from the main distribution board to the parking area, cable length, available electrical load, breaker capacity, earthing and the location of the isolator.

Because the charger may operate continuously for several hours, cable sizing and terminal quality are critical. A charger that works for a few minutes is not enough; the installation must remain safe under sustained load.

ROX 01 for Family Trips and Outdoor Use

The vehicle's charging profile suits family and off-road use. The owner can charge at home before a long trip, use the petrol range extender when needed and return without depending completely on public charging.

The official V2L function also adds practical value for outdoor activities. ROX lists 2.2kW in the trunk and 2.2kW external output, depending on the operating setup. This can support selected appliances and equipment, but the total load must remain within the vehicle's rated output.

DC Charging: CCS2 or GBT DC

GCC versions may use CCS2 DC, while many China imports use GBT DC. The exact DC power can also vary by version.

Check the port and vehicle manual before recommending a DC charger or CCS2 to GBT adapter.

Recommended MEV Charger Products

Type 2 7kW Wallbox

For GCC versions with a Type 2 AC port.

GBT 7kW Wallbox

For China-imported vehicles with a GBT AC port.

Portable Type 2 or GBT Charger

Choose the plug according to the actual vehicle port.

Charging Adapters

A Type 2 to GBT AC adapter or CCS2 to GBT DC adapter may be suitable after confirming compatibility.

Type 2 Charging Cable

Useful for public AC stations or untethered wallboxes, depending on the charger setup.

Higher-Capacity Type 2 Wallbox

An 11kW or 22kW wallbox can be selected for future flexibility or multi-vehicle use, but ROX 01 will follow its onboard AC limit.

Installation Priorities in the UAE

Outdoor heat, cable distance, continuous current and panel capacity should all be considered. The wallbox should be positioned where the charging cable reaches the vehicle comfortably and where direct heat exposure is reduced when practical.

The final handover should include an under-load charging test, earth verification, breaker test and explanation of safe daily use.

Conclusion

ROX 01 is one of the more interesting PHEVs for home charging because its 56.01kWh battery is large enough to make a dedicated wallbox genuinely valuable. The official 7kW AC figure and 8.6-hour full-charge time make a Type 2 7kW wallbox the most practical choice for most UAE owners.

MEV Charger can inspect the site, supply the correct charger and install the system with suitable cable, protection, isolation and earthing.